Automated Chicken Processing Line 10000 Bph
|FOB Price:||US $34,500 / Set|
|Min. Order:||1 Set|
|Min. Order||FOB Price|
|1 Set||US $34,500/ Set|
|Payment Terms:||L/C, T/T|
- Application: Goose, Duck, Chicken
- Automation: Automatic
- Trademark: One-Stop
- Specification: ZBM100, 200, 300, 400
- HS Code: 84383000
- Voltage: 380V
- Condition: New
- Transport Package: Bulk
- Origin: China
Brief introduction of poultry plucker machine
Models : We have four type chicken plucker :
1. Small chicken plucker
2,Middle capacity chicken/duck/goose plucker
3,Large capacity "A"shape vertical feather removal machine
4,Large capacity Horizontal poultry feather removal machine
Suitable for chicken, duck, goose, bird, quail, parrot, reptile and so on.
Below are details information
Large capacity "A"shape vertical feather removal machine
This machine is made by 304 stainless steel . And it can working continuously without ant pollution to the chickens. It can remove the feather of chicken, we also have duck plucker machine.
There are 48pcs hair removal plates, each plate has 12 plucker fingers.
If pluck chicken, finger length--85mm, if pluck duck, finger length--95mm.
Small Chicken Plucker drum type
Poultry feather removal machine is used to remove the feather of poultry after butchered.
It is also suitable for the peeling of ginger,potato,and the skin removing of fish.
Chicken Plucker Using Method
1. Scald the poultry after slaughtered by hot water of 65-80 degree.
2. Then turn on the machine,put the scalded poultry into the machine(ginger,potato
and fish can put into directly).
3. After 10 seconds working,turn on the tap,and wash away the removed feather,
then take out the poultry.
4. The whole process of process chicken is about half minute.
Chicken Plucker Attention
1. Equip a leakage switch on the ground line.
2. Turn on the switch,and check if the machine running normally before using.
3. Wash the tube completely after using.
4. After long time using,please change the robber stick when they are wearing or broken. So as to ensure the working efficiency.
5. After a period of using,if the rolling disc become slower,it might be the belt screw track slip.
6. Then please adjust the nut on the machine base, but note it can't be too tight.
|Depilation net rate||96%||96%||96%|
|DIA of barrel||80CM|
Large capacity Horizontal poultry feather removal machine
A. It is applicable for the depilation process after dip-scalding;
B. It adopts a flat-plate multi-drum-type structure;
C. Uses the electrically-
adjustable lifting method, which facilitates depilation for various poultries;
D. It provides such virtues as abroad application, high depilation efficiency, low breakage rate, low trouble rate, and convenient operation
|Motor:||8kw 380v 50hz|
Extra Large Automatic Chicken Depilator
The machine is suitable for plucking chicken, duck and goose feather. It can be used
alone and also in poultry processing line. The plucking roller is horizontal in machine.
It adopts chain transmission, which make the upper and the lower two rows of plucking roller rotate relatively. The spacing of upper and lower two rows of plucking roller is
adjustable, suitable for different size chicken, duck and goose.
Usage and Application:
Specially suitable for chicken, goose, duck defeathering. High rate for depilating, apply to large scale poultry treatment plant and breeding processing plant.
Technical Parameters for Extra Large Automatic Chicken Depilator:
|Name||Extra Large Automatic Chicken Depilator|
|Numbers plucking roller||5 7 9(customized)|
|Plucking roller Length||910mm|
Poultry Slaughtering Equipment
1) Poultry cage conveyor
1. Poultry cage conveyor (20m in length , stainless steel , power: 6kw)
2. Poultry cage cleaning machine (stainless steel , power: 6kw)
3. Spray type scalding machine for chicken feather
(stainless steel , length: 15m , 6 waterlifts , power: 18kw)
4. type vertical depilator
(stainless steel , crude peeling : 1 set . Fine peeling: 3 sets. Power: 13.2kw)
5. Spiral pre-cooling machine
(stainless steel ,diameter: 2m , length: 9m, 2 sets draught fan, power: 11kw)
6. Segmentation conveyor
(stainless steel,length: 16m.length: 1.2m,with Bilateral workbench, power: 1.5kw)
2) Slaughter blood line
1. Slaughtering conveyor line
(It includes 1m stainless steel orbit, 1m stainless steel chain , 6.5pcs stainless steel hook ,6.5pcs nyl on frame and connecting piece) (Stainless steel frame
2. speed regulation power
1.5kw 3 phase Common motors assembly 4# cycloidal pin wheel Reducer, with engine base
3.Tension equipment (stainless steel frame)
4. Corner wheel assembly
Cast aluminum wheel body, nylon gear ring , galvanized frame
3) Viscera digging machine
1.Conveyor line of viscera digger
2. Power of speed regulation
4. Corner wheel assembly
4) Chicken paw cutting line
1. Cutting conveyor line
2. Power of speed regulation
3. Tension equipment
4. Corner wheel assembly
5) Auxiliary equipment
1. Chicken paw cutting machine
2. Chicken heat cutting machine
3. Chicken gizzard peeling machine
4. Oiling machine
5. Check feet cutting machine
6. Visceral chute ( stainless steel , length :4m ,width: 0.4m)
1000Chickens/h Slaughter and Parting Line
|1000 Chickens per hour Slaughter&Cutting Line Equipment List|
|I. Slaughter/Scald/Defeather Section|
|1||Hanging conveyor for slaughter||L=88m||set||1||Hook space: 6 inches; It consists of T rail, SUS T straight rail, bend rail and connections, SUS drive chain, nylon hanger and SUS plastic trolley, SUS hook, SUS drag chain and drive device and frame. Motor reducer, variable-frequency speed control system, tensioning gear, slewing gear and SUS connections are included.|
|2||Waterbath stunning machine (Larger size)||set||1||SUS frame, fiberglass groove|
|3||Air drum type scalding machine (Larger size)||Full closed||set||1||Length:3.3m, scalding time:1minute; It includes SUS air drived stirring system, 1 air blower, SUS poultry baffle, SUS shell and steam enclosed cover, SUS rail and corner wheel, water level and temp auto control system;|
|4||Vertical defeathering machine||6 rows with 8 plates each row||set||1||Adjustable SUS frame, two parallel cabinets; total 6 rows with 8 plates each row, each plate has 12 rubber whips; 6 belt drive devices, 6 high speed chinlon belts, feather baffle and SUS spray pipe are included;|
|5||Hook washing machine (larger size)||set||1||SUS frame, 2 nylon brushes and motor drive, 2 SUS brush cabinet and spray pipes|
|6||Automatic poultry unhooking device||set||1||Made from SUS|
|7||Carcass chute||set||1||Made from SUS|
|8||Electric control cabinet||DK-1||set||1||Used to control the drive equipments in this section|
|II. Evisceration Section|
|1||Evisceration hanging conveyor||L=32m||set||1||Hook space: 8 inches; It consists of T rail, SUS T straight rail, bend rail and connections, SUS drive chain, nylon hanger and SUS plastic trolley, SUS hook, SUS drag chain and drive device and frame. Motor reducer, variable-frequency speed control system, tensioning gear, slewing gear and SUS connections are included.|
|2||Evisceration reception chute||pc||4||SUS chute and frame with adjustable legs|
|3||Carcass washing device||pc||1||Frame, shell and pipes are made from SUS|
|4||Electric control cabinet||DK-4||set||1||Used to control the drive equipments in this section|
|III. Pre-cooling Section|
|1||Spiral pre-cooling Machince(Larger size)||L=9m||set||1||Screw diameter:1.8m, including chute, SUS tank and frame, SUS screw propulsion device, auto poultry output system, air-blast system and air blower, motor reducer; Cooling media: cold water or brash ice(cold water chilling unit and slice ice machine)|
|2||Carcass reception chute||L=2m L=3m||set||2||SUS chute and frame|
|3||Electric control cabinet||DK-4||set||1||Used to control the drive equipments in this section|
|IV. Cutting Section|
|1||Hanging conveyor for cutting||L=45m||set||1||Hook space: 8 inches; It consists of T rail, SUS T straight rail, bend rail and connections, SUS drive chain, nylon hanger and SUS plastic trolley, SUS hook, SUS drag chain and drive device and frame. Motor reducer, variable-frequency speed control system, tensioning gear, slewing gear and SUS connections are included.|
|2||Worktable||1800×900×800||pc||15||SUS frame and adjustable legs, and SUS worktable|
|3||Electric control cabinet||DK-3||set||1||Used to control the drive equipments in this section|
|IV. Installation materials cost (Mainly major steel beams, hanging,materials, etc.): Total 15t,buyer can source at your local, we give the drawing or buying from us.|
|V. Installation fees: Including the worker's round tickets, salary $100/day/person, Accommodation.|
|VI. Transportion Cost: To be discussed.|